ISDN Driver Installation
MicroLink ISDN/PCC-16
Manual © 1997 ELSA GmbH
11
3.3 Installation under Windows 95
Requirements
To install the Windows 95 CAPI driver you will require the ELSA
MicroLink
CD
and your Windows 95 CD.
Install Dial-Up
Networking
Before installing the CAPI driver, the Dial-Up Networking in Windows 95 must
be properly installed. Proceed as follows:
1. Start Windows 95 and double-click the symbols in the following series:
My Computer, Control Panel, Add/Remove Programs
and
Windows Setup.
2. Select the component
Communications
.
3. Select
Details
and highlight the
Dial-Up Networking
component.
Confirm with
OK
.
4. From the
Control Panel
, double-click on the
Network
icon. If there is
no Dial-Up Adapter present, then select
Add...
,
Adapter
,
Add...
. Now
select Microsoft from the Manufacturer dialog, select the Network
Adapter, and click on
OK
.
The Dial-Up Networking should now be properly installed and ready for
operation. In case you require further help, please refer to the Windows 95
documentation.
Install the
Network Adapter
The installation of the ISDN CAPI 2.0 drivers under Windows 95 is performed
via the CAPI Subsystem which is supplied on your ELSA
MicroLink
CD. You
should also have your Windows 95 diskettes or CD ready. The installation is
described as follows:
1. Insert your ELSA
MicroLink
CD into your CD-ROM drive (e.g. drive
d:
)
2. In Windows 95, double-click on the symbols
My Computer, Control
Panel
, and
Network
. The
Network
dialog will be opened; click
on
Add
:
