Appendix: CAPI Error Codes
MicroLink ISDN/PCC-16
Manual © 1997 ELSA GmbH
31
CAPI error code Meaning
Reason and possible solution
400Ch
Error in document transfer; wrong data sent Your fax software sends wrong data to the
adapter board. Contact the manufacturer of
your software or your dealer
New ELSA Error Codes
CAPI error code Meaning
Reason and possible solution
Requested operating mode not supported
31FFh
No further connection possible for this
application
Resource problems, probably too many CAPI
32Feh
No further B channel layer 3 connection
available
applications loaded simultaneously
32FFh
No further B channel available
◊
NOTE
◊
Error codes not listed here are errors between the application and the CAPI
interface. Please refer to the manual for this application or contact the
manufacturer.
CAPI 2.0 Error Messages
CAPI
error
code
Meaning
Reason and possible solution
CAPI REGISTER Error Codes
1001h Too many applications
Close other applications
1002h Logical block size too small (minimum 128 bytes)
1003h Buffer exceeded 64 kb
1004h Message buffer too small minimum 1024 Bytes)
1005h Maximum number of logical connections not
supported
Configure your applications for a maximum
of two connections, if applicable
1006h reserved
1007h The message could not be accepted because of an
internal overload
Repeat the call
1008h Problem with the computer's resources (e.g. too little
memory)
Close other applications
1109h CAPI not installed
Install CAPI
