ELSA MicroLink ISDN/PCC-16, Руководство пользователя

Страница: 30 / 53

Appendix: CAPI Error Codes
30
MicroLink ISDN/PCC-16
Manual © 1997 ELSA GmbH
CAPI error code Meaning Reason and possible solution
34A1h Remote side busy Try to call again later
34A5h Semi-permanent connection not allowed
between these stations Apply to your network operator for semi-
permanent connections
34B5h Wrong remote number, service or service
attribute Check the remote number and the
availability of the desired services (this
applies also to private branch exchanges)
34B8h Remote number has changed Ask for the new number of the remote side
34B9h Remote terminal device not ready Check whether the remote side is ready for
operation
34Bah No remote device has answered the call Check whether the remote side is ready for
operation and the remote EAZ or MSN used
34BBh Remote terminal device busy Try to call again later
34BDh Incoming calls locked on the remote side Ask the remote side to accept incoming calls
34Beh Call refused by remote side Contact the remote side
34D9h Network busy Try to call again later
34Dah Call refused or disconnected by the remote
side Try to call again later or contact the remote
side
34F0h Local protocol error Try to call again and check the CAPI driver
34F1h Remote protocol error
Fax operation
4001h Connection could not be established; no fax
device detected on the remote side Check the remote number or contact the
remote side
4002h Connection cannot be established; local fax
module busy Wait until the current fax/modem connection
is finished
4003h Line distortion during document transfer,
remote side has refused the transfer due to
poor line quality Try to call again
4004h Document transfer not possible due to line
distortion Try to call again
4005h Error in document monitoring; data sent too
slowly to fax module Select a lower transfer speed for fax
operation or close other active applications
4006h Fax module locked; too many failed
attempts Try to call again later
4007h Document transfer aborted on local side,
canceled by user or software Check why the fax software has aborted the
connection
4008h Disconnection due to misbehavior of the
remote side; command repetition failed Try to call again
4009h Explicit logical disconnection by the remote
side Contact the remote side
400Ah Unexpected disconnection during document
receiving, line disconnected Try to call again
400Bh Transfer mode not supported by the remote
side (e.g. file transfer or high resolution) Check the operating mode and resolution
setting of your fax software