8 - EN
ECOLOG-NET LP4
EL6006Ee
Instructions and safety guidelines
2.4 Precautionary measures for handling units containing lithium batteries
Lithium batteries
- Do not short-circuit and charge batteries: Explosion hazard
- Do not throw units which contain batteries into fire: Explosion hazard
- Do not subject batteries to mechanical stress and do not dismantle them as leaking battery fluid is
highly corrosive and lithium can generate severe heat or can ignite a fire if it comes into contact with
moisture.
- Do not heat battery operated units to temperatures exceeding 100°C: Explosion hazard
- Avoid excessive impact
- Follow the manufacturer specifications for storing batteries
- Return batteries to the supplier for correct waste disposal
2.5 Precautions in handling with power supply units
Power supply unit
Follow the safety and application instructions of the power supply unit.
2.6 Battery backup / lifetime
Battery lifetime
2.7 Logger display / Power-saving mode
Power-saving mode -
display
The datenlogger ECOLOG-NET has a power-save mode which switches off the display. As a result, mea-
surements are only made during the defined log interval.. Four small circles located in the display indicate
that the datalogger is functioning and recording correctly. The display is switched on and off using the
elproLOG ANALYZE software - Extended setup - Display mode / power save.
Power-saving mode -
automatic
If no external power supply is available, the datalogger automatically enters power-saving mode. To check
the status during Power-saving mode, use the keypad to temporarily switch on the display.
2.8 Overlaying graphical data
Data from multiple
dataloggers
elproLOG ANALYZE Function: Overlaying
This function allows graphs from multiple dataloggers to be ECOLOG-NET LP4displayed simultaneously.
To utilize this function, each datalogger must have the same recording interval.
approx. 3 months In the event of a power failure, the internal battery backup functions for approximately.
Battery low
This indicator (
) is activated when the battery capacity limit is reached.
Replace the battery at the next possible opportunity (
