ELPRO ECOLOG-NET LP4, Руководство по эксплуатации

Страница: 12 / 32

12 - EN
ECOLOG-NET LP4
EL6006Ee
Settings in elproLOG ANALYZE
5. Settings in elproLOG ANALYZE
5.1 Datalogger setup
5.2 Extended setup
Window "Datalogger Setup" is used to define the implemented measuring parameters.
- Mode
- Log Start
- Log Interval
- Module Tag
- Zoom Preset
- Sensor
Name Function
Direct calibration by values ...
Set calibration date This function is used for calibration of the datalogger
only
Definition of the alarm thresholds...

6. Threshold value and alarm function
Reset alarm This function is used to acknowledge an alarm mes-
sage.
Set date and time... Used to adjust the integrated datalogger clock
Configure logger display...

2.7 Logger display / Power-saving mode
Configure communication settings... No function in this version
Set temperature unit... Selection of temperature units used.
A selection can be made between °C and °F
Set new password...
Programming of battery change time... This function restarts the radio datalogger after a bat-
tery replacement (

2. Instructions and safety guide-
lines ).