EN - 25
ECOLOG-NET LP4
EL6006Ee
Maintenance
IT
ES
EN
EN
FR
IT
ES
11. Maintenance
Maintenance sched-
ule
To ensure proper datalogger functioning, the following steps should be part of a periodic maintenance
schedule:
- Perform datalogger readout and save the data
- Test the alarm function, if implemented
- Replace the battery
(Part no. 800556, set of 2, storable for at least 5 years / lithium 3.6V, 2100mAh, AM3/LR6/AA)
Battery
An energy consumption counter is used to monitor datalogger battery life. For this reason, only the specific
manufacturer recommended battery should be used. Do not remove the battery from the logger when it is
not in use. The use of third party batteries or removal of batteries will produce incorrect status information
at the battery indicator.
Replacing battery
AFTER THE BATTERIES ARE CHANGED, THE BATTERY CHANGE TIME MUST BE SET
(ELPROLOG ANALYZE SOFTWARE - EXTENDED SETUP - PROGRAMMING BATTERY
CHANGE TIME...) OTHERWISE THE ENERGY COUNTER WILL NOT FUNCTION
CORRECTLY!
