Instruction manual
I ELOshield
Rev. 20
09.03.2020
Page 5 of 85
The installation, start-up and maintenance works must be performed by qualified personnel
only.
All cables and connections must be laid in a manner preventing damages and minimizing
susceptibility to inference.
ELOshield must be installed so as it does not obstruct the view and does not interfere with
vehicle entry and exit.
When ELOshield is installed and used, applicable standards and directives in a given country
must be observed.
The installation and all other works on the device must be performed with a vehicle switched
off (with battery disconnected).
ELOshield specification and technical data must be respected.
When the device service life elapses, ELOshield must be disposed of in a correct and
environment-friendly manner.
WARNING
Changes or modifications made to this equipment not expressly
approved by (manufacturer name) may void the FCC
authorization to operate this equipment.
NOTICE
The antenna module complies with the FCC radiation exposure
limits set forth for an uncontrolled environment. Co-location of
this module with other transmitters that operate simultaneously
are required to be evaluated using the FCC multi-transmitter
procedures. The RF exposure has been calculated with a 20 cm
separation distance.
NOTICE
The pedestrian module complies with the FCC radiation
exposure limits set forth for an uncontrolled environment.
