Instruction manual
I ELOshield
Rev. 20
09.03.2020
Page 17 of 85
DANGER
Electrical voltage hazard.
Touching live parts can result in death. Damage to insulation or individual
components can be life-threatening.
The power supply must be disconnected when working on electrical
components.
Metal objects such as rings or watches must be removed beforehand.
Connection, testing and measuring work on electrical parts may only be carried
out by a qualified electrician.
If the electrical parts are faulty or damaged, turn off the electrical power supply
immediately and initiate repair.
The regulations of the local energy supplier must be complied with.
5.1
Operating modes
Normal – the default operating mode, when the device is switched on. Active warning and
alarming for all threat types.
Driver’s muting
mode – It may be activated by short-pressing the Q button, when the
pedestrian module is within the muting zone range. This mode is designed for a vehicle
operator and used to mute the pedestrian module, when the operator drives the vehicle, so
as not to block its vehicle and other vehicles, as the vehicle is used. In this mode, the
pedestrian module becomes invisible to all vehicles, and stops alarming and warning about
threats. The visibility is restored, as the driver zone is exited by a driver. The driver zone must
be small enough to cover only the inside of the vehicle with its range.
Driver muting is only available with at least 2 antenna modules (A).
DANGER
Note that a different person than the driver can mute his pedestrian module,
especially, if vehicle muting zone is too large.
The
acknowledge
mode – It may be activated/deactivated by pressing the
Q
button for 2
seconds and is used to mute the alarm in the pedestrian module. Alerts in vehicles will still
be active. The mode will be automatically deactivated as conditions deteriorate (when a new
threat appears in the proximity) or when the configurable period of time elapses – from 0
seconds to 18 hours.
