Elnec BeeHive204, Руководство пользователя, Страница: 96 / 179

Elnec s. r. o.
96
Next devices will have same format of serial number incremented by 1 for each device.
Example 3:
Following example uses the same serialization options as Example 2a; instead the serial
number Split gap is set to 2 and 3.
When Split gap is set to 2 bytes, the buffer content will look as following:
Byte buffer organization:
Address Data
0000080
CD xx xx AB xx xx 34 xx xx 12 xx xx xx xx xx xx
Word16 buffer organization:
Address Data
0000040
xxCD ABxx xxxx xx34 12xx xxxx xxxx xxxx
When Split gap is set to 3 bytes, the buffer content will look as following:
Byte buffer organization:
Address Data
0000080
CD xx xx xx AB xx xx xx 34 xx xx xx 12
Word16 buffer organization:
Address Data
0000040
xxCD xxxx xxAB xxxx xx34 xxxx xx12 xxxx
Note: When you are not sure about effects of serialization options, there is possible to test the
real serial number, which will be written to buffer. The test can be made by following steps:
1. select wished serialization options in dialog Serialization and confirm these by OK button
2. in dialog Device operation options set Insertion test and Device ID check (if available) to
Disabled
3. check there is no device inserted to programmer’s ZIF socket
4. run Device Program operation (for some types of devices it is necessary to select
programming options before programming will start)
5. after completing programming operation (mostly with some errors because device is not
present) look at the main buffer (View/Edit buffer) at address where serial number should
be placed
Note: Address for Serialization is assigned to current buffer organization that control program
PG4UW is using for current device. If the buffer organization is byte org. (x8), the Serialization
Address will be byte address. If the buffer organization is wider than byte, e.g. 16 bit words
(x16); the Serialization Address will be word address.
Device / Device options / Serialization / From file mode
Using the From-file method, serial values are read from the user specified input file(s) and
written serialization data to buffer on specified addresses.
There are two basic kinds of From-file serialization depending on format of serialization file
used.