Elnec BeeHive204, Руководство пользователя

Страница: 142 / 179

Elnec s. r. o.
142
Program PG4UWMC is used for fully parallel concurrent device multiprogramming on more
programmers or on multiprogramming capable programmers connected to USB/LAN ports of
one or more computers.
PG4UWMC is focused to the easy monitoring of high-volume production operations. Operator-
friendly user interface of PG4UWMC combines many powerful functions with ease of use and
provides overview of all important activities and operation results without burdening of operator
with non-important details.
PG4UWMC is using a project file to control the multiprogramming system. Project file contains
user data, chip programming setup information, chip configuration data, auto programming
command sequence, etc. Therefore the operator error is minimized, because the project file is
normally created and verified by engineers and then given to the operator. The optional
Operator mode can be set for PG4UWMC to avoid unwanted/unintended operations.
Each chip may be programmed with different data such as serial number, configuration and
calibration information.
Program PG4UWMC consists of following main windows:
main window
settings dialog window
"Search for Programmers" dialog window
For more details about multiprogramming and how to use PG4UWMC, please refer to user
manual for any of our USB interfaced concurrent multiprogramming system (programmer).
The basic description of the main parts of PG4UWMC
PG4UWMC main window