Elnec BeeHive204, Руководство пользователя

Страница: 34 / 179

Elnec s. r. o.
34
Introduction
BeeProg2 is an extremely fast universal USB/LPT interfaced universal programmer built to
meet the strong demand of the small manufacturing and developer’s community for the fast
and reliable universal programmer.
BeeProg2C is a cost effective version of BeeProg2 programmer (without some special
devices and LPT port interface). If you need program some of the mentioned devices, please
take a look at BeeProg2 programmer.
BeeProg2 / BeeProg2C supports all kinds of types and silicon technologies of today and
tomorrow programmable devices without family-specific module. You have freedom to choose
the optimal device for your design. Using built-in in-circuit serial programming (
ISP ) connector,
the programmer is able to program ISP capable chips in circuit.
BeeProg2 / BeeProg2C aren’t only programmer, but also tester of TTL/CMOS logic ICs and
memories. Furthermore, it allows generating user-definable test pattern sequences.
BeeProg2 / BeeProg2C provides very competitive price coupled with excellent hardware
design for reliable programming. It is probably best "value for money" programmer in this
class.
BeeProg2 / BeeProg2C provides extremely fast programming due to high-speed FPGA
driven hardware and execution of time-critical routines inside of the programmer. As a result,
when used in manually operated production this one-socket-programmer in most cases waits
for an operator.
BeeProg2 / BeeProg2C interfaces with the IBM PC compatible personal computers, running
MS Windows OS, through USB (2.0 high speed) port or any standard parallel (printer) port
(except BeeProg2C). Support of both USB/LPT port connections gives you the choice to
connect the BeeProg2 programmer to any PC, from latest notebook to older desktop without
USB port.
BeeProg2C has only USB interface but after upgrade to BeeProg2, also high-speed
IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available (LPT port connection usage is
disabled in software only).
BeeProg2 / BeeProg2C provides a banana jack for ESD wrist straps connection to easy-to-
implement the ESD protection control and also other banana jack for earth wire.
BeeProg2 / BeeProg2C has a FPGA based totally reconfigurable 48 powerful TTL pindrivers,
which provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced
pindrivers incorporate
high-quality high-speed circuitry to deliver signals without overshoot or
ground bounce for all supported devices. Improved pindrivers operate down to 1.8V so you'll
be ready to program the full range of today's advanced low-voltage devices.
BeeProg2 / BeeProg2C performs device insertion test based on the check of proper signal
path between the programmer and programmed device before it programs each device. In
dependence on programming configuration it identifies missed or poor contact between
programmed device and the ZIF socket of the programming adapter (or the programmer
directly), missed or poor contact between the programming adapter and the programmer and
it's also able to indicate
wrong position of device in the ZIF socket of the programmer / the