47
5.
Press straight stitch to reset straight stitch
length. Close zipper. Turn zipper face up (right
seam allowance forms a small fold at basting
line) and smooth zipper teeth away from seam.
6.
Attach zipper foot B with right side pin. Starting
at the bottom, sew through folded seam
allowance and zipper tape.
Stop just before foot reaches slider. Lower
needle slightly into fabric. Raise foot and open
zipper. Lower foot and sew.
7.
Close zipper and spread fabric flat with right side
facing up. Set stitch length to 5.0 and baste
through opened seam allowance and zipper tape
A
. Reset straight stitch length.
8.
Attach zipper foot B with left side pin. Guide
edge of foot along zipper teeth and stitch
through garment and zipper tape. Stop about 5
cm (2") from top of zipper. Slightly lower needle
into fabric. Raise foot, remove seam basting and
open zipper
A
.
9.
Lower foot and stitch remainder of seam,
making sure fold is even. Remove basting
stitches.
Содержание XQUISIT 2
