22
7.
Push bobbin to the right.
While holding the free end of the thread, start
the machine. Stop the machine when the bobbin
has made a few turns and cut thread tail close to
hole in bobbin. Continue winding bobbin and
stop machine when bobbin is full.
8.
Return bobbin winding shaft to the left. Cut the
thread and remove bobbin. Remove and store
bobbin winding shaft. Close bobbin winding
shaft cover.
NOTE: Be sure to correctly wind the bobbin.
Incorrectly wound bobbins can result in
jammed threads, tension problems, etc.
Inserting the Bobbin
Turn off power/light switch.
1.
Raise the presser foot. Place the bobbin in the
bobbin case with the thread running
counterclockwise.
2.
Guide the thread into notch
A
on the front side
of the bobbin case. Hold bobbin with right hand
and pull thread to the left, through tension spring
blades. Continue pulling thread lightly until
thread slips into notch
B
.
Pull about 15 cm (6") of thread.
3.
Replace bobbin case cover.
1
2
3
8
7
A
B
Содержание XQUISIT 2
