SAVE THESE INSTRUCTIONS
FOR USA ONLY-
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any
way.
Use only foot control YC-700 (UL, CSA) with your Xquisit II.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be
observed, including the following:
Your Elna Xquisit II computerized sewing/embroidery machine is designed and
constructed for HOUSEHOLD use only. Read all instructions before using this
machine.
DANGER
- To reduce the risk of electrical shock:
1.
An appliance should never be left unattended when plugged in. Always unplug this appliance from the
electric outlet immediately after using and before cleaning.
2.
Always unplug before relamping. Replace bulb with same type rated 3 Watts.
WARNING
-
To reduce the risk of burns, fire, electric shock or injury to
persons:
1.
Do not allow to be used as a toy. Close attention is necessary when this machine is used by or near
children.
2.
Use this appliance only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as described in this manual.
3.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the appliance to the nearest authorized dealer or service
center for examination, repair, electrical or mechanical adjustment.
4.
Never operate the machine with any air openings blocked. Keep ventilation openings of the sewing machine
and foot controller free from accumulation of lint, dust and fibers.
5.
Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
6.
Always use the proper needle plate. The wrong plate can cause the needle to break.
7.
Do not use bent needles.
8.
Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
9.
Switch the sewing machine off (“0”) when making any adjustments in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot and the like.
10.
Always unplug sewing machine from the electrical outlet when removing covers, lubricating or when
making any other servicing adjustments mentioned in the instruction manual.
11.
Never drop or insert any object into any opening.
12.
Do not use outdoors.
13.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
14.
To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
Содержание XQUISIT 2
