21
➐
OTHER FEATURES
■REAL TIME CLOCK FUNCTION
By setting the time, you can add time information to the data (video / still image) when
recording to the SD card.
HOW TO SET THE TIME
①
Set up the product and connect an image output device with a commercially available RGB
cable.
②
Set the output mode of the Output mode selection switch to RGB. Then turn on the power of
the product.
③
Press and hold the REC button and MIC MUTE button together for about 4 seconds.
④
The Channel 1 LED, Channel 2 LED, MIC MUTE LED, and REC LED start to flash green
and the Time Set screen will be displayed
.
⑤
Set the time using the Channel 1 button, Channel 2 button, MIC MUTE button, and REC
button.
⑥
Press and hold the REC button and MIC MUTE button together for about 4 seconds.
The time setting is completed and the product returns to the normal mode.
■VIEWING FILES IN THE SD CARD ON A
COMPUTER
You can view the still images or videos saved in the SD card on your computer.
Remove the SD card from the product and insert into your computer to playback the recorded
still images or videos.
You can also view the recorded files using the USB Mass Storage
function. (Only for the HS-G2 and HS-G3)
Connect the USB port in the rear panel and your computer with the USB cable.
Do not remove or insert the SD card while the product is connected to a computer in the USB
Mass Storage mode.
マークの画を
もらう
マークの画を
もらう
MIC MUTE button
REC button
Long-press for about 4
seconds.
LED flashes green
（
4 LEDs
）
Channel button 2
Cursor moves right.
(Year→Month→Day→Hour→Minute)
REC button
Value : UP
Channel button 1
Cursor moves left.
(Year←Month←Day←Hour←Minute)
MIC MUTE button
Value : DOWN
