17
The supplied remote control uses a coin cell battery, type “CR2025”.
➎
SWITCHING THE DISPLAYED IMAGE
■SWITCHING THE INPUT SOURCE
The HDMI device to input can be selected by the following methods:
※
Make sure that the Output mode selection switch is set correctly.
＜
Switching with the Channel buttons on the Operating panel
＞
Select the desired port by pressing the Channel button
（
①
～
⑧
）
on the Operating panel.
The video of the HDMI device connected to the selected port appears.
＜
Switching with the remote control
＞
Select the desired port by pressing the Channel button
（
①
～
⑧
）
on the remote control.
The video of the HDMI device connected to the selected port appears.
【
CAUTION
】
The time it takes to change the channel may differ depending on the connected device.
■REMOTE CONTROL
The input source can also be switched from the remote control.
PREPARATION OF THE REMOTE CONTROL
Remove the cover in the back of the remote control and insert the supplied battery.
REMOTE CONTROL OPERATIONS
Button
Name
Function
①
～
⑧
Channel buttons To select the HDMI input for CH.
REC button
To start/stop recording.
（
The recorded video file will be saved
in the SD card
）
Capture button
To capture still images.
（
The captured image will be saved in
the SD card.
）
MIC MUTE
button
To mute the microphone during
recording.
マークの画を
もらう
NOTE
