18
The receivable range may be reduced when the product is placed in direct sunlight or near
an inverter fluorescent light.
Depending on the surrounding environment, the receivable range may be shorter or the
sensor may fail to receive any infrared light. In such cases, relocate the product or shield
the light source.
【
CAUTION
】
●
About Recording
There are cases where recording is not possible.
In that case, LED of the REC button flashes.
For details, refer to “
➏
RECORDING FEATURS
”.
RECEIVING SIGNAL FROM THE REMOTE CONTROL
Point the transmitter of the remote control at the receiver of the product. Then press the
desired button.
PAIRING OF THE REMOTE CONTROL
By pairing the remote control with the product, the remote control works as a dedicated
remote control for the product.
HOW TO DO THE PAIRING
①
While the product is powered off, press the Power button of the product for long. Then press
the Channel button
①
of the remote control three times.
②
Check that the pairing is successfully completed. (The Channel LED of the 8 Channel
buttons of the product will flash 2 times.)
HOW TO CANCEL THE PAIRING
①
While the product is powered off, press the Power button of the product for long. Then press
the Capture button of the remote control three times.
②
Check that the pairing is cancelled. (The MIC MUTE LED and REC LED will flash 2 times.)
NOTE
Remote control sensor
