Daily cleaning operation
© Elma Schmidbauer GmbH
BA_Elmasolvex_SE_EN_Vers. 03.2018
25
Now fasten the cleaning basket in the mounting of the cleaning
machine again (
Fig. 6.2.1.A
)
.
Ensure that the cleaning basket is correctly locked in the
locking mechanism (
Fig. 6.2.1.B
).
Ensure that the holder is correctly screwed to the drive shafts
(
Fig. 6.2.1.D
).
6.3
Loading movement holder (optional)
The movement holder is intended for cleaning dismantled watch
movements and PCBs.
Note the following instructions before operation of the
movement holder in order to prevent damage to the product to
be cleaned and cleaning machine.
Only use the original Elma movement holder.
The movement holder (
Fig. 6.3.1.C
) is connected to the
cleaning machine using bayonet connection at the mounting
(
Fig. 6.3.1.A
).
Hold the mounting (
Fig. 6.3.1.A.
) firmly with one hand, then first
press the movement holder slightly upwards
and then turn it
anticlockwise
out of the locking elements (Fig. 6.3.1.B).
Fig. 6.3.1. Movement holder attached
Mounting
for cleaning basket and movement holder.
During removal of the movement holder, the mounting remains
screwed to the drive shaft using a grub screw (Fig
. 6.3.1.D
).
Locking mechanism
is a part of the mounting. The movement
holder engages in the recesses provided for this in the locking
mechanism (bayonet connection).
Fastening cleaning
basket in the
mounting
ATTENTION
Removing movement
holder
A
B
A
D
B
C
