Elma ELMA-1336, Инструкция по эксплуатации

Страница: 6 / 29

4
SET01 : Measurement illuminance unit lx or fc setting mode.
SET02 : Real time setting mode.
SET03 : Auto datalogging interval time setting mode.
SET04 : Auto-cycle timer datalogging setting mode.
SET05 : No-cycle timer datalogging setting mode.
SET06 : Auto power off time setting mode.
7. Tcp key :

Sets the meter into color temperature measurement mode.

Press this key to circulate the reading of (Ev, Tcp, uv) and ( Ev, Tcp,
uv ).
8. Time key : Press this key to switch the display of minute : second, day/hour and
year
.
/. month. The real time will be displayed if the real time setting
function was performed, otherwise the elapsed time will be displayed.
9.

key
:

Store the displayed setting value or exit a setting mode.

Recall the reference value or other for use in measurement.
10 . CF key : Use this key to switch use of correction factor ON or OFF, and to set
the CF.
11 .

MEM key :


key
: In the setting mode, press this key move flashing cursor to left.

MEM key : a). Memory function: Press this key one time to store a measuring
value.
b). Press this key for 3 seconds to enter or exit the datalogging
mode.
12 .
▲ ▼
key : In the setting mode, press this key to increase, decrease the
displayed setting.
In the
READ
mode, press this key to increase/decrease the memory
location.
13 . READ

key :


key: In the setting mode, press this key move flashing cursor to right.

READ key :
Read function : Press this key to enter the READ mode, then press
▲
or
▼
key to select the desired stored number of data to
read. Press

key to exit.