Elma ELMA-1336, Инструкция по эксплуатации

Страница: 13 / 29

11
key to review the target values. Press H key again to exit the data hold
mode.
5-4 Measuring the Correlated Color Temperature
5-4-1 Taking correlated color temperature measurements
1. Press the key to turn on the meter.
2. Remove the photo detector cap and aim the receptor at the light source you
want to measure.
3. Press Tcp key to enter the correlate color temperature measurement mode.
The display shows the measurement results.
The meter can display color temperature values from 2300 to 20000K.
The meter can display uv values up to (but no including) 0.1.
If either the temperature reading or the uv value is outside the display range,
the meter will blinking for both values.
5-4-2 Taking correlated color temperature difference measurements
The meter display calculated values that are based on to measure the
difference between the sample and a target correlated color temperature.
5-4-2-1 Using a measurement result as the target
1. Measure the correlated color temperature of a source as descibed under