Elma ELMA-1336, Инструкция по эксплуатации

Страница: 26 / 29

24
6. Repeat step 3 and 4 to complete the end-time setting.
7. Press

key to stored the End time and to enter the Interval-Time setting mode,
the
“
INTV
” mark and the flicking number of minute are displayed.
8. Repeat step 3 and 4 to complete the interval time setting.
9. Press

key to stored the interval time and to enter the ON/OFF selecting
mode.
10. Press
▲
or
▼
key to select
“
on
” or “
OFF
”.
11. If select
“
OFF
” then press

key to exit.
12. If select
“
on
” then press

key to complete the action and to enter the no-
cycle timer datalogging mode, the
“
A
” mark is flick displayed.
13. In this datalogging mode if Auto-Power off function is enabled, the meter will
enter a battery saver mode if a key is not pressed. In the battery saver mode
will shutdown circuits not necessary, including the display.
14. When the start time is reached, the
“
A
” mark is stop flick and the “
SD
” mark
is displayed. When the
“
M
” mark disappeared one time means one set of
data has been memorized.