Elma ELMA-1336, Инструкция по эксплуатации

Страница: 25 / 29

23
15. If no SD CARD in the meter, the
“
Sd Err
” mark is displayed 2 seconds then
exit.
16. If memory is full, the
“
Sd FULL
” mark is displayed.
17. During this mode, press

key to review the start-time, record-time and
interval-time.
18. Press
“
MEM
” key for 3 seconds to exit.
The maximum capacity is 4GB.
5-11 No-Cycle Timer Datalogging
The no cycle timer means the start-time and the end-time is valid only one time.
1. Perform setting the Real-Time. (refer to 5-8)
2. Press SET key five times to change the setting mode to
“
SET 05
” to enter the
Start-Time setting mode, the annunciator
“
StAto
” and the flicking number of
year
“
.
/.
”. are displayed.
3. Using

and

keys, position the cursor on the date or time element to
adjust.
4. Use
▲
and
▼
keys to setting the selected date or time element value.
5. Press

key to stored the start time and to enter the End-Time setting mode,
the
“
End
” mark and flicking number of year “
.
/.
” are displayed.