Elliott SpeedCut SCT78, Инструкция по эксплуатации и техническому обслуживанию

Страница: 33 / 42

SpeedCut 33
Maintenance Instructions (cont.)
Annually
8. Sound and Tighten Foundation Bolts.
9. Replace Gear Box Oil.
a.) Replace Gear Box Oil with Uptime SCH634 Synthetic or equivalent.
b.) Fill to pipe plug identified with oil level sticker on unit. Do not overfill unit.
As Required
10. Renew Hydraulic Oil
a.) Lower frame to full down position to facilitate draining of hydraulic reservoir
b.) De-energize circuit. Tag “OUT OF SERVICE.”
c.) Remove drain plug and drain oil.
d.) Reinstall drain plug.
e.) Remove filler cap.
f.) Fill reservoir to proper level with MOBIL DTE 25 Hydraulic Oil or equivalent.
The tank will hold approximately 10 gallons.
g.) Remove safety tag. Energize circuit.
h.) Return saw to normal operating condition.
11. Replace Hydraulic Filter
a.) Lower frame to remove all pressure from hydraulic lines.
b.) De-energize circuit. Tag ‘OUT OF SERVICE’.
c.) Replace “spin-on” hydraulic filter with part # 911231.
d.) Remove safety tag. Energize circuit.
e.) Return saw to normal operating condition.
NOTE:
To access the hydraulic filter, the case for the hydraulic pump will need to be
temporarily removed.