Elkron MP 200, Руководство по установке и обслуживанию

Страница: 32 / 32

* The maximum distance that can be achieved depends directly on the power supply cable section (+ and -) of the
serial itself and the consumption occurring at the other end . In this respect, remember that for every 200m of
2x0.75 mm
2
cable with 100mA of consumption , account for approximately 1V of drop.
D
EDICATED
A
CCESSORIES
-----------------------------------------
EP200/8Z Concentrator
- Supply voltage ........................................................... 12V min 10,5V max 15V
- Power consumption at 12V rated voltage— ................ 48 mA max. with all inputs NC (with 2 R/G LEDs flashing)
28 mA max with all inputs balanced
- Type of interface ......................................................... RS485 serial protocol
- Max. length of serial line between concentrator/CU .... 500 metres* (cable section 2x0.75 for power 2 x
0.22 x data)
Kp200d Remote Keypad
- Supply voltage ........................................................... 12V— (from motherboard – serial line)
- Minimum/maximum operating voltage ........................ da 10.5V a 15V—
- Power consumption at 12V rated voltage— ................ 40 mA (system ON - network present – backlight off)
78 mA max. (backlight on and all LEDS lit)
- Type of interface ......................................................... RS485 serial protocol
- Max. length of serial line between concentrator/CU .... 500 metres* (cable section 2x0.75 for power 2 x
0.22 x data)
- Anti-tamper/anti-removal ............................................ standard with uncoded identification of each element tampered
with
- Protection level of case .............................................. IP30 - IK04
- Max. number of possible combinations ...................... 100,000 for each single access code
10,000,000 for remote management and remote surveillance
code
Stm200 Modem Board
- Power consumption when idle at 12V— ..................... 18 mA
- Max. power consumption (during transmission) .......... 40 mA
SV108 Voice synthesis Module
- Power consumption at 12V— ..................................... 20 mA
- Max. power consumption (during transmission) .......... 25 mA
Dk4000 Series Connectors and Splitters
- Supply voltage ........................................................... 12V— (taken from the motherboard – serial line)
- Min/max operating voltage ........................................ da 10.5V a 15V—
-
Power consumption at 12V— ..................................... 13 mA (all LEDs ofF)
35 mA max. (LEDs1-2-4 lit)
60 mA with key inserted (code transmission)
- Type of interface ......................................................... RS485 serial protocol
- Max. length of serial line between concentrator/CU .... 500 metres*(cable section 2x0.75 for power 2 x
0.22 x data)
- Max. number possible key combinations ................... 1099 billion
- Max. number memorised by the system .................... (64 – no. access codes managed) for MP200/64
(256 – no. access codes managed) for MP200/256
ELKRON S.p.A.
Via Carducci, 3 - 10092 BEINASCO (TO) - ITALY
TEL. +39.011.3986711 - FAX +39.011.3499434
www.elkron.it e-mail info@elkron.it