Elkron MP 200, Руководство по установке и обслуживанию

Страница: 13 / 32

MP200 Installation Manual
13
4.7 TERMINAL BOARD DESCRIPTION
M1 TERMINAL BOARD
- Supplementary electrical ouptut negative
U1 Electrical output, programmable, protected. Max current = 10 mA
U2 Electrical output, programmable, protected. Max current = 10 mA
U3 Electrical output, programmable, protected. Max current = 10 mA
U4 Electrical output, programmable, protected. Max current = 10 mA
U5 Electrical output, programmable, protected. Max current = 10 mA
U6 Electrical output, programmable, protected. Max current = 10 mA
U7 Electrical output, programmable, protected. Max current = 10 mA
U8 Electrical output, programmable, protected. Max current = 10 mA
M2 TERMINAL BOARD
- (-HPA) siren power supply negative
+ (+HPA) siren power supply positive (2A 14.5V) protected by F1
NC NC relay contact
NO NA relay contact
C Relay com.
NC NC relay contact
NO NA relay contact
C Relay com.
M3 TERMINAL BOARD
NC Relay 3 NC contact
NO Relay 3 NA contact
C Relay com.
+ (+HPS) Positive self-powered siren power supply (I max 2A), protected
by F3
- (-HPS) Negative self-powered siren power supply
NOTE: the HPS+ will fail if there is no mains power supply; for
this reason it can only be used to connect self-powered devices.
M4 TERMINAL BOARD
+ Battery positive. Protected by F5.
- Battery negative
M5 TERMINAL BOARD
- Negative power supply input
+ Positive 14.5V power supply input
C Power supply unit control (connect to power supply unit terminal C)
Ground terminal (see para. Ground connection)
M1
-
- +
C
POWER SUPPLY
M5
RELAY U9 = ROBBERY (I MAX = 1A)
RELAY U10 = SABOTAGE (I MAX = 1A)
When the control unit is powered up,
the 2 relays, U9 and U10, are
normally excited. During normal
operation the NC and NO terminals
will appear swapped.
M2
I MAX = 5A
RELAY U11 = FREELY PROGRAM.
M3
M4