Elk Products ELK-M1XEP, Руководство по установке

Страница: 16 / 24

ELK-M1XEP
v2
Installation Manual
Page 16
Port Forwarding - Particular ports must be opened through the router to allow access to the M1XEP via the Internet.
You must access the router's setup in order to open (port forward) these ports. The method for this differs from
product to product. Some routers use a software utility to access their setup while others can be accessed via a web
browser. Consult the router's documentation for complete instructions on this procedure.
Notes on Router Setup
The table below lists the ports used by the M1XEP that should be port forwarded through the router.
Port Use Routing Protocol
2601 Encrypted communications port. Route outside to connect with ElkRP TCP
Configurable by installer. via Internet/WAN.
2601 is the default.
21 M1XEP Firmware Updates Route outside if ElkRP will connect via FTP or TCP
Internet/WAN to download firmware updates
to the M1XEP.
Other Ports Used by the M1XEP
The following table contains additional ports used by the M1XEP. These ports should not be opened (port forwarded)
outside the local network.
Port Use Protocol
2362 The M1XEP listens on this port to respond to a "FIND" Command. UDP
2101 Plain text communications port. Configurable by installer. 2101 is default. TCP
Audio (optional)
For detailed information on audio control, including supported equipment and commands, please reference the M1
Audio Control application note available at www.elkproducts.com.