Eliwell TelevisGo, Руководство пользователя

Страница: 29 / 68

Televis
Go Page 29/68
5.4.2.3 Action
The Action section allows you to set the Type of action to be performed.
Type
Command
Action
Command
Manual defrost activation
Manual defrost activation
Lock keyboard
Unlock keyboard
A
command
type action specifies the command to be applied to the
selected devices (see below).
The command drop-down menu lists all commands for all devices
currently included in the network configuration.
Type
Type
File name
Action
Parameter writing
Parameter map
Map_1.dat
A write parameters (parameter map) action requests the file map name
to be applied each time the action is performed.
The file name must be specified in the
File Name
box.
To make sure Televis Go successfully performs the operation, the file
map must be loaded from the system update page (see section entitled
"System Update Modes").
Type
Type
Parameters
Action
Parameter writing
Parameters
Set
HAL
LAL
-2
1
-5
Label
Value
Label Value
For write parameter type actions, the list of parameters to be written and
their associated values must be entered manually. At least one parameter
must be entered.
To enter a new parameter, write the label name in the Label box, the value
in the Value box then click the
button. The label/value pair will be
added to the list below.
If there is a ??? label, Televis
Go
will remove it from the list as soon as a
new pair is added.
If a pair already exists with the same label, Televis
Go will overwrite the
previously inserted value.
To remove a previously inserted label/value pair from the list, click the
button. If you remove the last parameter in the list, Televis Go will
automatically add a ???/??? pair.
Important! Televis Go distinguishes between upper and lower
case in label names.