Eliwell TelevisGo, Руководство пользователя

Страница: 23 / 68

Televis
Go Page 23/68
The following page is displayed when Alarms is clicked:
Page last update on: 7.39.34
Edit Save
Cancel
System
Alarms
TelevisTwin
Reboot the system in order to make the new settings active.
General
sms: +390000000
e-mail - Server - Address
e-mail - Server - Port
e-mail - Server - Sender address
e-mail - Server - Authentication required
e-mail - Account - Name
e-mail - Account - Password
[1 .. 65535]
Copy sender address
Email server configuration
25
SMS alphabet
Modem signal strength lower alarm threshold (%)
[1 .. 100]
SMS
Standard 7 bit
40
Message
Telephone number
Signal strength: Not available
Test utility
Message
Address
Test utility
Test SMS from TelevisComp
+390000000
Test email from TelevisComp
change@email.address
SMS Phone
Email
Alarms - Retry interval
Alarms - Retry duration
[0 seconds .. 30 days]
[0 seconds .. 30 days]
00:01:00
01:00:00
Alarms - Emergency recipient
Media
In “ Alarms ” you can set the following
1) GENERAL :
• Alarms - Retry interval : to set the interval between 2 consecutive attempts to send an alarm.
(see section entitled “ Alarm management ”)
• Alarms - Retry duration: to set the maximum interval in which to attempt to send an alarm.
(see section entitled “ Alarm management ”)
• Alarms - Emergency recipient : to set the telephone number to which an emergency TXT will be sent should
the Televis
Go database becomes corrupted and the recipients set by the user
are no longer available.
2) TXT :
• TXT alphabet : to set the kind of alphabet you want to use when sending TXT messages.
Standard 7 bit (default) or UCS2 or Cyrillic 7 bit .
by default it is set to "7 bit"
• Lower model signal threshold alarm (%) : to set the minimum modem signal threshold (as a percentage) which must be
reached before a "Modem signal insufficient" alarm is activated.
3) Email server address configuration :
• Email - Server - Address
: to set the email server address.
• Email - Server - Port : to set the email server connection port.
• Email - Server - Sender's address: to set the sender's email address.
• Email - Server - Authentication request: to tell the system whether an authentication request is required
(tick the box if the Server requires authentication).
• Email - Account - Nome : to set the user name (if authentication is required).
• Email - Account - Password: to set the user password (if authentication is required).
The " Media " card is described in the " Alarm Management " section.
Test Utility sections are shown on the right: here users can check instantly if the settings applied are correct and working properly.