Eliwell RadioAdapter, Руководство пользователя

Страница: 6 / 12

Radio
Adapter
Pag. 6/12
The
Radio
Adapter device can function as part of the network, as a PAN-C, as a NODE or a repeater.
The Radio Adapter should therefore be configured accordingly when it is actually inserted into the network.
The communication network consists of:
- A Radio Adapter configured as PAN-C and connected to a monitoring system (Televis or Modbus)
- A
Radio
Key device to identify and configure the network.
- Up to 100 Radio Adapters serving as communication NODES for devices. Just one device or a sub-network of
up to 240 devices can be connected to a node.
2.1 - HOw TO INSTALL THE PAN-C
2.1.1 - INITIALIzING THE PAN-C
Power
Supply Power
Supply Power
Supply
- Connect the
Radio
Adapter to the power supply.
- Set the switch on the Radio Key to position 0.
- Connect the Radio Adapter to the Radio Key and wait for the YELLOW LED (P) (on the Radio Key)
to switch on (GREEN LED (N) off).
At this point, theRadioAdapter is now configured as PAN-C and all PAN-C information is sent to the
Radio Key.
- From now on, the Radio Key can only be used with this network.
- We recommend you mark this Radio Adapter with the sticker supplied.
2.1.2 - CHANNEL SEARCH 2.1.3 - SAvING PAN-C SETTINGS
Power
Supply Power
Supply Power
Supply
- Install the PAN-C and connect it to
the power supply when all potential
forms of radio interference are present
(e.g. alarm systems, WiFi, etc..)
- The PAN-C will start searching for a
free channel: this step is indicated by
the flashing RED LED (it will take about
4 minutes)
- When this scan has finished, the RED
LED will start to blink more slowly
Power
Supply
Power
Supply
Power
Supply
- Set the switch on the
Radio
Key to
position 0 and connect it to the PAN-C
in turn connected to the power supply.
- When the YELLOW LED (P) on
the
Radio
Key lights up, disconnect the
Radio Adapter from the power supply.
- Disconnect the Radio Key.
- Install and configure NODES and any
REPEATERS.
(see section “How to install a NODE”)
NETWORK STRUCTURE
PAN-C
RS-485
PAN-C
RS-485
IMPORTANT! Radio Adapter is not compatible with PC Interface USb
2 - INSTALLATION