Elite Learning Universal Remote Control
– R800D
Ver. 1.1
www.elitescreens.com
/
/ Page 4 of 23
3. Then release them, the Elite Screen detailed type will be displayed on the screen.
4. You can press the
or
key to select the type of your device (e.g. your detialed type:
ELITE 7U 01
).
5. Press the
OK
key to save it. LCD shows
SUCCESS
and then finishes the set up.
5. Point
R800D
to the receiver window of screen control box and Press the
or
or OK(STOP) key to Check
the function .
● Set Up(
by Enter Code)
for ELITE SCREEN
1. Be sure already Fixing the Elite Screen OK,be sure have Switched on the Screen.
2. In the back section of this manual, find the elite screen detailed type and code number(e.g.
ELITE 7E02
).
3. Press the
SET
key on
R800D
for more than 3 seconds, then release it.
4. Press the
or
keys to select to
C O D E S E T U P
in the LCD menu, and press the
OK
key.
5. The screen shows the
D EV S E A R C H
in the LCD menu, press the
or
keys to select to
D E V S E T U P
in the LCD menu, and press the
OK
key.
6. Then you press device key
SCR
on
R800D
and then press the
OK
key, you must now enter the
3-digit device
code
(e.g.
006
for
ELITE 7E02
)
7. Press the
OK
key to save it and LCD shows
SUCCESS
,
and press the device key
SCR
to exit the SETUP mode.
8. Please check the function of the keys UP,DOWN,OK(STOP) on
R800D
.
