13
ELITE PURSUIT AIR BIKE ASSEMBLY MANUAL
5.2 INTERVAL 10-20
A. Press INTERVAL Key to select INTERVAL10/20, then press Enter Key to enter into this mode.
INTERVAL10/20 will flash the buzzer will beep 1s at the same time.
B.CYCLE TIME begins to count down 3s, and then START, the buzzer will beep in every second. The
READY will flash in every second (flash 0.75s/ quench 0.25s), the value display 00/08(picture 6).
C. CYCLE TIME begins to count down 10s, the WORK will flash in every second (flash 0.75s/ quench
0.25s), and the buzzer will beep at the same time. REMAINING will flash and count down from 4
minutes. TOTAL TIME, DISTANCE, CALORIES, WATTS, SPEED, RPM begin to accumulate according to
the operation value, the value display 01/08.
D. CYCLE TIME begin to count down from 10s, and the REST will flash in every 1s (flash 0.75s,
quench 0.25s), the buzzer beeps at the same time. At the last 3s, the READY will flash at the same
time.
E. C and D will perform tautologically and circularly, each cycle count plus 1 until display “WORK
08/08”. After exercise, CYCLE TIME begin to count down from 10s, and the REST will flash in every
1s,( flash 0.75s, quench 0.25s).
F. If there is no signal input for 30s, the buzzer will ring 1s. Then it will enter SLEEP mode.
G. Press the START button one time to enter into STOP mode, the buzzer will ring 0.5s in every
30s. After entering into STOP mode, all values will remain on the screen for 3s, and flash in every
4s (flash 3s, quench1s). If stop mode is on for more than 5 minutes, the buzzer will sound 2s, and
then enter into SLEEP mode. Press START to exercising again.
H. Press the STOP button to finish, the buzzer will ring 1s. The workout values will be displayed.
I. When there is heartbeat input, the heartbeat value of 85%, 65% and maximum heartbeat value
85%, 65%will switch display. If there is no heartbeat input. All values won’t display.
Picture 5
Picture 6
Picture 7
Picture 8
ELITE DEFENDR AIR BIKE MANUAL
