11
ELITE PURSUIT AIR BIKE ASSEMBLY MANUAL
OPERATION INSTRUCTION
1. Install batteries to power on, the console will show full screen for 2s (picture 1) with a long
beep sound. At the distant window, it will display the wheel diameter value for 1s (picture 2).
Then setting the age, the age number will flash. Press up/down to adjust. Then press enter key to
confirm and enter into standby mode.
2. INTERVAL10/20, READY, WORK, REST, TARGET, TIME, DISTANCE, CALORIES, TIME, DISTANCE,
CALORIES, WATTS, SPEED, RPM, HEART RATE will flash. (Like picture 3)
3. The monitor will entry SLEEP mode (LCD off) when there is no signal input and no key be
pressed after 1 minute.
4.
Quick start mode:
A. If there is RPM signal input in standby mode, the console will quick start with a buzzer sound.
B. TOTAL TIME, TIME, DISTANCE, CALORIES, WATTS, SPEED and RPM begin to increase according to
operation value.(picture 4)
C. If there is heartbeat input, the heart icon will flash. The icon will flash and display the current
heartbeat value (picture 4).
D. If there is no signal input for 30 seconds, the buzzer will ring once. Then it will enter into standby
mode.
E. Press the START button, to enter into STOP mode, the buzzer will make a sound for 5s in every
30s. After enter into STOP mode, all value will be remained on the screen for 3s, and flash in every
4s (flash 3s, quench1s). If stop mode is on for more than 5 minutes, the buzzer will make sound for
2s, and then enter into standby mode. Press START to exercise again.
F. Press the STOP key, the console will make a sound once. TIME display the total time, DISTANCE
display the total distance, and CALORIES display the total Cal for 30seconds. WATT, SPEED, RPM will
switch display the average value and the maximum value.
Picture 1
Picture 2
Picture 3
Picture 4
ELITE DEFENDR AIR BIKE MANUAL
