14
5.3 INTERVAL CUSTOM
A.
Press the INTERVAL Key to select INTERVAL CUSTOM, press the Enter Key to enter into this
mode. INTERVAL
CUSTOM, 00/XX will flash, and the buzzer beeps 1s at the same time. Press UP or
DOWN to set 00/XX, the setting range is 1-99 which can be set circularly. Press ENTER to confirm,
and then the buzzer will beep 1s and enter into the next setting (picture 7-picture 8).
B.TIME keeps flashing, WORK and 0:01
will blink. User can press UP or DOWN to set the exercise
time. The setting range is 0:00
-
9:59 which can be set circularly. Press ENTER to confirm. The buzzer
will beep 0.75s and enter into the next setting.
C.
TIME keeps flashing, REST and0:01 will. Flash, press UP or DOWN to set the exercise time. The
setting range is 0:00
-
9:59, which can be set circularly. Press ENTER to confirm, the buzzer will beep
1s, INTERVAL
CUSTOM will keep flashing.
D.
CYCLE TIME counts down 3s, then START. The buzzer will beep 1s in every second, and READY
will
flash in every second (flash 0.75s / quench 0.25s) the value will display 00/XX.
E.
CYCLE TIME begin to count down, and the WORK will flash in every 1s (flash 0.75s, quench
0.25s), the buzzer will beep at the same time. REMAINING begin to flash and count down from the
total time. TOTAL TIME, DISTANCE, CALORIES, WATTS, SPEED, RPM begin to accumulate according
to the operation value, the value display 01/XX.
F.
CYCLE TIME begin to count down, and the REST will flash in every 1s (flash 0.75s, quench 0.25s),
the buzzer beeps at the same time. At the last 3s, the READY will flash at the same time.
G.
C and D will perform tautologically and circularly, each cycle count plus 1 until display the setting
value. After exercise, CYCLE TIME begin to count down from 10s, and the REST will flash in every
1s,
( flash 0.75s, quench 0.25s)
H.
If there is no signal input for 30s, the buzzer will ring 1s. Then it will enter SLEEP mode.
I.
Press START button one time to enter into STOP mode, the buzzer will ring 0.5s in every 30s.
After you enter into STOP mode, all values will be remained on the screen for 3s, and flash in every
4s (flash 3s, quench1s). If stop is more than 5 minutes, the buzzer will sound 2s, and then enter
into
SLEEP mode. Press START to exercising again.
J.
Press the STOP button to finish, the buzzer will ring 1s.
The workout values will be displayed.
K.
When there is heartbeat input; the heartbeat value of 85%, 65% and maximum heartbeat value
85%, 65%
will switch display. If there is no heartbeat input. All values won’t display.
L.
Press any PROGRAM to perform this action.
