6
ASSEMBLY INSTRUCTIONS
STEP 1:
Before assembling your machine, please take care when removing the parts from the box to avoid
scratching or damaging them.
STEP 2:
Insert 2 x 6903 bearings into the (6)
M
oving
A
rm assembly and secure to the
F
rame
A
xle with (5)
Footpad Tube. Use picture below for reference.
STEP 3:
Attach the Front (3) and Rear (4) Stabilisers using 2 x M10 x 40mm
B
olts (10), 4 x Flat Washers
(11)
and 2 x M10 Nyloc Nuts (12). Tighten securely.
STEP 4:
Attach the Pedal (7) to the Crank Arm using a 15mm spanner.
NOTE: Make sure to attach Right Pedal, marked (R), to the Right Crank (R). It should be tightened
clockwise. Attach the Left Pedal, marked (L), to the Left Crank (L). It should be tightened anti-
clockwise. Attaching the Pedal to the wrong Crank or turning it the wrong direction will damage
the Crank. Ensure the pedals are tightened securely before using the bike.
STEP 5:
Attach the
S
eat (8) to the
S
eat
P
ost
S
tem at the desired position and secure, tightening the 2 x
S
ecuring
N
uts. Before using your exercycle, check that all parts are secured and tightened
correctly. If required, adjust the
F
oot
Levelers
on the front and
R
ear
S
tabilisers to ensure your bike
is stable.
