Elgas miniELCOR, Руководство по эксплуатации, Страница: 82 / 131

miniELCOR
75
If are all data in the line set in right way, then is consumption place set and
communication way between PC and device is ready. The user may test
communication with help of actual values reading (menu choice
Readout -> Actual
values
).
14.3.2 Communication channel setting
For successful communication between device and PC must be correctly set
the communication cannel. For communication cannel setting must be chosen
correct communication interface, communication speed, etc.
Setting progress
ƒ From menu choose:
Options –> Communication channels
ƒ In case of adding a new device in to the set service SW is possible to choose
already defined communication channel or define a new communication
channel with the button „+“ see Fig. 32.
ƒ Setting of new communication channel starts with choosing of connection
between device and PC (programme switch
Communication medium
). For
communication via infrared-head choose RS-232 and relevant communication
port COM . After this selection will be the new communication channel added
in the table
Configuration of communication channels
.
Configuration of communication channel:
ƒ name of communication channel – here assign your own mark (in case of
more communication channels is it better for its identification)
ƒ Speed of communication channel:
ƒ communication via infrared-head HIE-03,04 – communication speed up to
38 400 Bd (older model HIE-01 - communication speed 9600 Bd)
ƒ communication via serial port – Communication speed up to 38 400 Bd.
ƒ communication via modem – communication speed is set according to
communication speed of modem.
ƒ Other parameters are without changes.
Basically if user wants to edit the table, change is made with click on item.