Water Main Shut-Off Advanced User Manual
Factory Reset & Misc. Functions
Page 8
Resetting the Water Main Shut-Off
Press and hold the open/close button for at least 10 seconds then release. The
Shut-Off’s memory will be erased to factory settings. A flashing light indicates
a successful factory reset. Beware that resetting your device will disconnect it
from your system.
Only do this if the controller is missing or otherwise unreach-
able!
Emergency Operation
The Water Main Shut-Off can be operated manually in the event of a power out-
age, loss of communication with your Z-Wave Hub, or some other emergency.
Follow these instructions to manually operate the Shut-Off:
1. Unplug the power from your device.
2. Locate the MOTOR CLUTCH on the underside of your device (Fig 3,) and pull
it outward by the keychain ring. The CONTROL ARM will disengage from the
motor and move freely.
MOTOR CLUTCH
Figure 3 - Finding the MOTOR CLUTCH
Factory Reset & Misc. Functions
