background image

GB-4

General information

You can control one or more receivers with the UniTec-868
transmitter.
This device features a very simple operation.

Intended use

The UniTec-868 may 

only

be used for controlling roller shutter

or sun protection devices.

• Please note that radio systems must

not

be operated in

areas with an increased risk of interference (e.g. hospitals,
airports).

• The remote control is only approved for devices and systems

for which any malfunction of the manual transmitter or
receiver would not result in a risk for persons, animals or
property, or if such a risk is covered by other safety devices.

• The operator has no protection whatsoever from inter-

ferences by other radio emitters and local terminals
(e.g. also from radio installations), that are normally used on
the same frequency range.

• Only use radio receivers with equipment and units approved

by the manufacturer.

GB

Explanation of buttons 

GB-3

General information/intended use

UniTec-868

P

Explanation of buttons 

Buttons under the cover flap

Lerntaste (Geräterückseite)

Indicator lamp

Cover flap  

Manual/automatic

sliding switch

DOWN

-button

STOP

-button

UP

-button

Auto

Programming
buttons  

P

Содержание UniTec-868









Отзывы: