elem 5411074207595, Перевод оригинальной инструкции

Страница: 66 / 85

The correct cutting height for a decorative lawn is
around 25 - 45 mm, and for a more rustic lawn
around 45 - 65 mm.
An elevated cutting height
should be chosen for the first
cut of the season.
Inserting/removing the Battery (I)
Switch off the appliance,
remove the ignition key and
wait for the blade to come to
a complete stop
1. To remove the battery from the appliance, press
the release button on the battery and remove the
battery.
2. Insert the battery by sliding the battery along the
guides.
It clicks into place.
Switching on and off
1. Place the appliance on a flat surface.
2. Remove the cover from the appliance housing
and insert the charged batteries along the guide
tracks in the appliance.
They slot into place with an audible click.
3. Insert the ignition key in its slot next to the
batteries.
There is only one position in which the ignition key
can be inserted. Observe the guiding slot on the
opening next to the batteries and on the ignition key.
4. Before switching on, make sure the appliance is
not in contact with any other object.
5. To switch on the appliance, press and hold
down on the release button while you press on the
start handle. Let go of the release button.
6. To switch off, release the start handle.
After switching off the
appliance,
the blade continues to turn
for a few seconds.
Do not touch the moving
blade. There is a risk
of personal injury.
Working with the appliance
Regular mowing stimulates the formation of new
grass in the lawn, while also allowing the elimination
of weeds. The lawn fills out with each mowing,
which enables the development of an even lawn.
The first cut should be made around the month of
April when the height of the grass is around 70 to 80
mm. During the main growth period, the lawn should
be mown at least once a week.
• Work with the appliance at a walking pace, and
as much as possible in straight bands. For
impeccable mowing, the bands should always
overlap by a few centimetres.
• Adjust the cutting height so that the appliance is
not overworked.
Otherwise, the motor may be damaged.
• Always work at an angle on slopes.
Be particularly careful when reversing and when
pulling the appliance.
After switching off the
appliance,
the blade continues to turn
for a few seconds.
Do not touch the moving
blade. There is a risk of
personal injury.
CLEANING AND MAINTENANCE
Entrust repairs
not described in this
manual to an authorised
service centre.
Only use original
manufacturer spare parts.
Wear gloves when you handle
the blade.
Switch off the appliance,
remove the ignition key and
wait for the blade to come to
a complete stop.