Parameter description
8
08:05
Minimum
temperature heat
supplier
Setting range:
OFF (----)
5…80 °C
Factory setting:
OFF
Function:
Irrespective of switching differentials, pump turns on only after
the sensor of heat supplier F3 has exceeded the set value.
08:06
Maximum
temperature heat
supplier
Setting range:
OFF (----), 30 … 110 °C
Factory setting:
90 °C
Function:
Irrespective of switching differentials, the pump performs a
forced switch-on after the sensor of heat supplier F3 has
exceeded the set value.
08:07
Final switch-off
temperature heat
supplier
Setting range:
OFF (----), 70 … 210 °C
Factory setting:
OFF
Function:
Irrespective of switching differentials, the pump performs a
forced switch-off after the sensor of heat supplier F3 has
exceeded the set value.
08:08
Maximum
temperature heat
storage tank
Setting range:
OFF (----), 50 … 110 °C
Factory setting:
75 °C
Function:
Irrespective of switching differentials, the pump performs a
forced switch-off after the sensor of heat storage tank F1 has
exceeded the set value. This switch-off takes priority over
functions 08:07 and 08:06.
08:09
Burner block
Heat generator
Setting range:
0 ... 2
X2
Factory setting:
1
Function:
0 = OFF
1 = Burner block when pump is active
2 = Burner block only for DHW when pump
is active
08:10
Inhibition heat
generator
Setting range:
OFF (----) ... 24h
X2
Factory setting:
OFF
Function:
After burner block is active, the heat generator is also blocked for
the duration of the set time.
08:11
Activation of heat
balance
Setting range:
OFF (----)
X3
1 = Heat balancing via sensor on F2
Factory setting:
OFF
Function:
The settings of parameters 08:12 to 08:14 are only active if the
heat balance function has been switched on via this parameter.
Display
Designation
Description
BA_CETA100_EbV_EN_0450021000_0931-10.book Seite 8 Dienstag, 25. August 2009 3:33 15
