Elektron Syntakt Скачать руководство пользователя страница 73

Страница: 73 / 118

14. SETTINGS MENU

CLOCK RECEIVE

sets whether or not Syntakt responds to MIDI clock sent from external devices.

CLOCK SEND

sets whether or not Syntakt transmits MIDI clock.

TRANSPORT RECEIVE

sets whether or not Syntakt responds to MIDI transport messages sent from

external devices.

TRANSPORT SEND

sets whether or not Syntakt transmits MIDI transport messages.

PRG CH RECEIVE

will, when active, make Syntakt respond to incoming program change messages,

which is useful when wanting to select patterns externally. The MIDI channel that will listen to incom-

ing program change messages is set in the MIDI CHANNELS menu. For more information, please see

“14.4.3 CHANNELS” on page 74.

PRG CH SEND

will, when active, send program change messages when patterns are changed. The

MIDI channel that will send program change messages is set in the MIDI CHANNELS menu. For more

information, please see “14.4.3 CHANNELS” on page 74.

14.4.2 PORT CONFIG

Here you find the MIDI port related settings. Change settings by using the

[LEFT]

[RIGHT]

arrow keys.

TURBO SPEED

press

[YES]

to start the turbo speed negotiation. Speed is chosen automatically. Please

note that you must use a MIDI interface that supports the Turbo-MIDI protocol.

OUT PORT FUNCTIONALITY

selects what type of signal the MIDI OUT port will send.

•

MIDI

makes it possible for the port to send out MIDI data.

•

DIN 24

will make the port send DIN 24 sync pulses. No MIDI data is transferred over the port when

this option is selected.
•

DIN 48

will make the port send DIN 48 sync pulses. No MIDI data is transferred over the port when

this option is selected.

THRU PORT FUNCTIONALITY

selects what type of signal the MIDI THRU port will send. The settings

are the same as for OUT PORT FUNCTIONALITY.

INPUT FROM

selects the source Syntakt will receive MIDI data from.

•

DISABLED

will make Syntakt disregard any incoming MIDI data.

•

MIDI

will make Syntakt listen only to MIDI data sent to the MIDI IN port.

•

USB

will make Syntakt listen only to MIDI data sent to the USB port.

•

MIDI+USB

will make Syntakt listen to MIDI data sent to both the MIDI IN and USB ports.

OUTPUT TO

selects the destination to which Syntakt will send MIDI data.

•

DISABLED

will stop Syntakt from sending out any MIDI data.

•

MIDI

will make Syntakt send MIDI data to the MIDI OUT port only.

•

USB

will make Syntakt send MIDI data to the USB port only.

•

MIDI+USB

will make Syntakt send MIDI data to both the MIDI OUT and USB ports.

Содержание Syntakt























































































































Результаты поиска

Содержание Syntakt

Отзывы:

Похожие инструкции для Syntakt

Бренды по названию

Популярные бренды

Elektron Syntakt, Руководство пользователя

Результаты поиска

Содержание Syntakt

Отзывы:

Похожие инструкции для Syntakt

Бренды по названию

Популярные бренды