10. AUDIO TRACK PARAMETERS
51
10.5.3 BASE
Sets the base frequency of the filter. This parameter is only available if you have selected a track with a
Digital voice type (Track 1–8).
10.5.4 WIDTH
Sets the frequency width above the base frequency. This parameter is only available if you have selected
a track with a Digital voice type (Track 1–8).
The base-width filter is basically a Highpass filter and a Lowpass filter connected in series. The filters BASE
and WIDTH parameters define the base-width filters frequency range.
Examples of how the
BASE
and
WIDTH
parameters affect the filter frequency range:
FREQUENCY
AMPLITUDE
Base
Width
FREQUENCY
AMPLITUDE
Base
Width
FREQUENCY
AMPLITUDE
Base
Width
• The base-width filter is only available for tracks with Digital voices types (Track 1–8).
• With BASE set to 0, the filter functions as a low pass filter with WIDTH adjusting the fre-
quency range.
• With WIDTH set to 127, the filter functions as a high pass filter with BASE adjusting the
frequency range.
• With BASE set to 0 and WIDTH set to 127 the filter does not affect the sound.
10.6 AMP PAGE 1
The AMP page controls parameters for the amplitude envelope, effects sends, panning and volume.
Press
[AMP]
to access this parameter page.
10.6.1 ATK
Attack Time sets the length of the attack phase of the amp envelope.
10.6.2 HOLD
Hold Time sets the length of the hold phase of the amp envelope. Fixed Hold time values (0–126) specify
the length of the hold phase, and the envelope ignores Note Off events such as Trig Length, releasing
a
[TRIG]
key or a key on an external controller. Setting
HOLD
to NOTE means the hold phase will be
determined by Note On and Note Off events. For more information, please see “10.2 TRIG PARAMETERS
If you set HOLD to NOTE and use an external keyboard to trigger the envelope, then the
sound will be sustained for as long as you press a key on the keyboard.
10.6.3 DEC
Decay Time sets the length of the decay phase of the amp envelope. The decay time can be set to
infinite.
