manualshive.com logo in svg

Elektron Syntakt, Руководство пользователя

Поделиться
Скачать
Elektron Syntakt Скачать руководство пользователя страница 74

14. SETTINGS MENU 

74

If MIDI+USB is selected in the OUTPUT TO settings, MIDI data will limit the USB speed. 

When sending large chunks of data, make sure you only use the USB setting.

OUTPUT CH

 selects whether the knobs will send data on the auto channel or the track channel.

PARAM OUTPUT

 selects what type of MIDI messages the 

DATA ENTRY

 knobs will send. For information 

about which CC/NRPN parameters that will be sent, please see “APPENDIX B: MIDI” on page 108.

• 

NRPN

 will make the knobs send out NRPN MIDI messages.

• 

CC

 will make the knobs send out CC MIDI messages.

ENCODER DEST

 controls whether the 

DATA ENTRY

 and 

LEVEL/DATA

 knobs sends MIDI data or not. 

When set to INT, the knobs only affects the Syntakt and no MIDI data is sent. When set to INT + EXT, the 

knobs affects the Syntakt and also sends MIDI data to external devices.

TRIG KEY DEST

 controls whether the 

[TRIG]

 keys sends MIDI data or not. When set to INT, the 

[TRIG]

 

keys only affects the Syntakt and no MIDI data is sent. When set to INT + EXT, the 

[TRIG]

 keys affects 

the Syntakt, and also sends MIDI data to external devices. When set to EXT, the 

[TRIG]

 keys do not 

affect the Syntakt but MIDI data is sent externally.

MUTE DEST

 controls whether activating/deactivating mutes will send MIDI data or not. When set to INT, 

mute only affects the Syntakt and no MIDI data is sent. When set to INT + EXT, mute affects the Syntakt 

and also send MIDI data to external devices. When set to EXT, mute sends MIDI data externally, but do 

not affect the Syntakt.

RECEIVE NOTES

 will, when active, make it possible to play Syntakt using an external MIDI keyboard.

RECEIVE CC/NRPN

 will, when active make it possible to control Syntakt parameters from an external 

MIDI device sending CC/NRPN data.

14.4.3 CHANNELS

This menu handles the MIDI channel configuration.

TRACK 1–12

 selects the dedicated MIDI channel that is used to receive or send (by turning the knobs) 

parameter data to or from a specific audio/MIDI track. If configured as OFF, parameter data are nei-

ther received nor sent via MIDI.

FX CONTROL CH

 selects the dedicated MIDI channel that is used to receive or send (by turning the 

knobs) parameter data to or from the FX track and the DELAY and REVERB parameter pages. If con-

figured as OFF, parameter data are neither received nor sent via MIDI.

The sequencer data is always sent on the MIDI channel specified by the CHAN  

parameter on the SYN PARAMETER page if the track has a MIDI machine assigned.

AUTO CHANNEL

 selects the MIDI channel that will give access to the currently active track. If an ex-

ternal MIDI keyboard connected to Syntakt sends MIDI data on this channel, the keyboard will control 

the active track. This is useful when for example quickly changing between the active audio tracks 

to play different sounds. The Syntakt also uses the AUTO channel to record to the MIDI tracks from 

external MIDI controllers.

PROGRAM CHG IN CH

 selects the MIDI channel that will listen for incoming program change mes-

sages. An AUTO setting will use the AUTO channel. Enable Syntakt to respond to program change 

messages in the MIDI SYNC menu. For more information, please see “14.4.1 SYNC” on page 72.

PROGRAM CHG OUT CH

 selects the MIDI channel that will send program change messages when 

changing patterns. An AUTO setting will use the AUTO channel. Enable Syntakt to send program 

change messages in the MIDI SYNC. For more information, please see “14.4.1 SYNC” on page 72.

Содержание Syntakt























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды