Elektron Analog Four MKII, Руководство пользователя

Страница: 93 / 108

APPENDIX C: CV TRACK PARAMETERS
93
APPENDIX C: CV TRACK PARAMETERS
CV A-D
The CV A-D pages control the signals sent from the four CV/Gate outputs. Depending on the CV type
chosen in the CV CONFIG menu, the available parameters will change. For more information, please see
“12.6.1 CV A-D CONFIG” on page 60.
CV (GROUNDED)
No parameters available. The CV output will not
send any signal.
CV (PITCH V/OCT)
TUN (Coarse Tune) sets the coarse tuning of the
CV in semitones.
FIN
(Fine Tune) sets the fine tuning of the CV.
BND (Bend Depth) sets the bend depth. The higher
the setting, the more the pitch of a trigged note will
be offset.
SLI (Note Slide time) sets the CV control of the slide
time of note slides.
SRC (Source Track) sets the track to use for send-
ing CV signals. The CV track, FX track and synth
tracks 1-4 can be used as a source.
CV (PITCH HZ/V)
P arameters are the same as for the Pitch V/OCT.
CV (VALUE LIN)
VAL (Value) sets the voltage level of the CV. Appli-
cable when the chosen CV type is VALUE LIN.
CV (TRIG)
SRC
(Source Track) sets the track to use for send-
ing trig signals. The CV track, FX track and synth
tracks 1-4 can be used as a source.
CV (GATE)
SRC (Source Track) sets the track to use for send-
ing gate signals. The CV track, FX track and synth
tracks 1-4 can be used as a source.
CV (CLOCK)
CLK (Clock Division) sets the clock division. This
setting relates to the BPM of the sequencer.