Elektron Analog Four MKII Скачать руководство пользователя страница 27

Страница: 27 / 108

9. KITS AND SOUNDS

9.3.5 PERFORMANCE MIXER

Press

[MIX]

to open the PERFORMANCE MIXER menu. In this menu, the level of the tracks can be

controlled with

DATA ENTRY

knobs

A-E

9.4 QUICK PERFORMANCE

Quick performance gives you the possibility to control one of your performance macros without being in

PERFORMANCE mode. Press

[QPER] + [TRIG 1–10]

key to select which performance macro you want to

control with Quick performance. The

[TRIG 1–10]

keys correlates to the 10 performance macros you have at

your disposal. For more information, please see “9.3.2 PERFORMANCE CONFIGURE” on page 25. Once

you have selected which performance macro to control, use the

QUICK PERF AMOUNT

knob to control

how much the performance macro will affect the tracks.

9.5 POLYPHONY

Four voice polyphony can be configured by selecting POLY CONFIG in the KIT menu. The Analog Four

MKII is capable of four voice multitimbral polyphony (or unison). This is possible due to the powerful sound

engine which is able to change sound instantly and allow completely dynamic voice allocation (see figure

below). The sequencer is fully polyphonic, allowing overlapping notes and chords to be programmed on the

tracks. Any track can play up to four notes using its track sound. Notes are distributed to the synth voices

according to the selected allocation method. Any of the synth voices can also be poly-disabled, allowing

tracks to have their dedicated, monophonic synth voice available at all times. The poly configuration is

stored per kit, for maximum flexibility, allowing up to 128 different poly configurations per project.

MONOPHONIC

POLYPHONIC

TRACK 1

TRACK 2

TRACK 3

TRACK 4

VOICE A

VOICE B

VOICE C

VOICE D

TRACK 1

TRACK 2

TRACK 3

TRACK 4

VOICE A

VOICE B

VOICE C

VOICE D

9.5.1 POLYPHONY CONFIGURATION

The settings for up to four voice polyphony are found in the POLY CONFIG menu in the KIT menu.

Press

[FUNC]

[MIX]

to access the POLY CONFIG menu directly.

VOICES

Select any combination of the four voices to be poly activated by using the

[LEFT]

and

[RIGHT]

arrow keys. Tick or untick a box by pressing the

[YES]

key. To activate/deactivate voice 1–4 directly,

Содержание Analog Four MKII













































































































Результаты поиска

Содержание Analog Four MKII

Отзывы:

Похожие инструкции для Analog Four MKII

Бренды по названию

Популярные бренды

Elektron Analog Four MKII, Руководство пользователя

Результаты поиска

Содержание Analog Four MKII

Отзывы:

Похожие инструкции для Analog Four MKII

Бренды по названию

Популярные бренды