Elektron Analog Four MKII Скачать руководство пользователя страница 56

Страница: 56 / 108

12 GLOBAL SETTINGS MENU

12.5.2 PORT CONFIG

MIDI port related settings are found in this menu. Change settings by using the

[LEFT]

[RIGHT]

arrow

keys.

TURBO SPEED

selects the multiplier of the MIDI transfer rate that will be used when the Analog

Four MKII MIDI IN/OUT ports are connected to the MIDI OUT/IN ports of a turbo protocol compatible

device. The

[LEFT]

[RIGHT]

arrow keys are used to select the multiplier. If AUTO is chosen, press

[YES]

to start the turbo speed negotiation.

OUT PORT FUNCTIONALITY

selects what type of signal the MIDI OUT port will send.

MIDI

makes it possible for the port to send out MIDI data.

DIN 24

will make the port send DIN 24 sync messages. No MIDI data can be sent when this option

is selected.

DIN 48

will make the port send DIN 48 sync messages. No MIDI data can be sent when this option

is selected.

On DIN 24/48 operation: When the [STOP] key is pressed twice quickly, the DIN

sync outputs are put in a ready to start mode. In this mode, the synced unit will start

directly when the sequencer starts. When in this mode, an external unit (for example

a TB-303) cannot be programmed. Exit the ready to start mode by pressing [STOP]

once.

THRU PORT FUNCTIONALITY

selects what type of signal the MIDI THRU port will send. The avail-

able settings are the same as for OUT PORT FUNCTIONALITY above.

INPUT FROM

selects the source the Analog Four MKII will receive MIDI data from.

DISABLED

will make the Analog Four MKII disregard any incoming MIDI data.

MIDI

will make the Analog Four MKII listen only to MIDI data sent to the MIDI IN port.

USB

will make the Analog Four MKII listen only to MIDI data sent to the USB port.

MIDI+USB

will make the Analog Four MKII listen to MIDI data sent to both the MIDI IN and USB

ports.

OUTPUT TO

selects the destination to which the Analog Four MKII will send MIDI data.

DISABLED

will stop the Analog Four MKII from sending out any MIDI data.

MIDI

will make the Analog Four MKII send MIDI data to the MIDI OUT port only.

USB

will make the Analog Four MKII send MIDI data to the USB port only.

MIDI+USB

will make the Analog Four MKII send MIDI data to both the MIDI OUT and USB ports.

If MIDI+USB is selected in the INPUT FROM and/or OUTPUT TO settings, MIDI data

transfers may limit the USB speed.

OUTPUT CH

selects whether the mini-keyboard and the knobs will send data on the AUTO CHANNEL

or the MIDI channel of the selected track.

PARAM OUTPUT

selects what type of MIDI messages the

DATA ENTRY

knobs will send. For more

information, please see “APPENDIX D: MIDI” on page 96.

NRPN

will make the knobs send out NRPN MIDI messages.

will make the knobs send out CC MIDI messages.

ENCODER DEST

controls whether the

DATA ENTRY

and

TRACK LEVEL

knobs will send MIDI data or

not. When set to INT, no MIDI data will be sent. When set to INT + EXT, MIDI will be sent internally as

well as externally.

Содержание Analog Four MKII













































































































Результаты поиска

Содержание Analog Four MKII

Отзывы:

Похожие инструкции для Analog Four MKII

Бренды по названию

Популярные бренды

Elektron Analog Four MKII, Руководство пользователя

Результаты поиска

Содержание Analog Four MKII

Отзывы:

Похожие инструкции для Analog Four MKII

Бренды по названию

Популярные бренды