Elektron Analog Four MKII Скачать руководство пользователя страница 62

Страница: 62 / 108

12 GLOBAL SETTINGS MENU

Activate/deactivate routing of any the four voices to the main output and the FX track. Navigate using the

[ARROW]

keys. Tick or untick box with the

[YES]

key.

Alternatively, instantly activate or deactivate voice to main or voice to FX using the

[TRIG]

keys 1-4 and 9-12,

respectively. Red LEDs above these sets of keys will show if the voice is active (full-bright) or inactive (half-

bright).

Note that voice routing can be set and stored for each individual kit and that these settings override the

GLOBAL voice routing unless they are set not to. For more information, please see “9.2 KIT MENU” on page

23.

12.8 CONTROL INPUT 1

This menu item accesses the settings for the Control In 1 input. You can use this input to plug in different

modulation sources. The modulation is set in the CONTROL IN 1 MOD menu. For more information, please

see “9.2.8 CONTROL 1 IN MOD” on page 24.

MODE

Sets the port mode to adjust to different kinds of input signals. There are three modes:

(Control Volt-

age),

EXPR

(Expression Pedal), and

OFF

CV ZERO LEVEL

(Available when mode is set to CV.)

Sets the Volt level at which CV modulation amount is zero. A control input level equal to this setting cor-

responds to zero modulation. (-5.50 V–+5.50 V).

CV MAX LEVEL

(Available when mode is set to CV.)

Sets the Volt level at which CV modulation amount is max. A control input level equal to this setting cor-

responds to full modulation. (-5.50 V–+5.50 V).

EXPRESSION LEARN

(Available when mode is set to EXPR.)

Sets the highest and lowest limit of the control input level.

When in this setting, connect the Expression pedal

CONTROL IN A/B

. Press

YES and then move the expression pedal first to max and then to min

position. Press YES to save settings.

REVERSE DIRECTION

(Available when mode is set to EXPR.)

Reverses the direction of how the Expression pedal sends control input signals.

12.9 CONTROL INPUT 2

The available settings are the same as for

CONTROL IN 1

12.10 SYSEX DUMP

In the SYSEX DUMP menu, kits, Sounds, patterns, songs and global slots can be sent and received. Select

a menu option using

[UP]

[DOWN]

or the

TRACK LEVEL

knob. Press

[YES]

to open the highlighted menu

selection.

Содержание Analog Four MKII













































































































Результаты поиска

Содержание Analog Four MKII

Отзывы:

Elektron Analog Four MKII, Руководство пользователя, Страница: 62 / 108

Результаты поиска

Содержание Analog Four MKII

Отзывы: