© EA Elektro-Automatik in 2022, this information is subject to change without notice
33
06230920_manual_ps_10000_3u_15kw_en_01
2.3.5.2 Cable lead and plastic cover
The scope of delivery included a plastic cover for the DC terminal which serve as contact protection. It must always be in-
stalled when operating the device. There are breakouts so that the DC cables can be laid in various directions.
The connection angle and the required bending radius for the DC cable must be taken into account when
planning the depth of the complete device, especially when installing in a 19” cabinet or similar installa-
tions.
Examples for the type 1 terminal:
•
90° up or down
•
space saving in depth
•
no bending radius
•
horizontal lead
•
space saving in height
•
large bending radius
