ELEKTRA MACINADOSATORE, Руководство пользователя

Страница: 31 / 40

gb
66
TROUBLESHOOTING J
THE MACHINE DOES NOT HEAT UP (N)
If the machine was switched on by mistake without having filled the water circuit (see chapter
“E STARTING UP THE NEW MACHINE FOR THE FIRST TIME”), the heating element safety device
might have been activated.
This device protects the electric heating element against damage due to momentary
overheating caused by lack of water.
Proceed as follows:
1) Proceed as indicated in chapter “E STARTING UP THE NEW MACHINE FOR THE FIRST TIME”.
2) Check that the machine heats up correctly: if it does not, switch off the machine by
putting the on/off button 1 to OFF and pull out the plug.
3) Remove the cup-warming grille 6.
4) Remove the cup-warming tray 7 after loosening the screw 5.
5) Remove the yellow plastic cap located on the tank casing.
6) IInsert a sharp pointed object into the hole left by the yellow cap and use it to press
the small underlying button.
7) Refit the yellow cap, the tray 7, the screw 5 and the grille 6.
8) Connect the plug to the power socket and switch on the machine by putting the on/off
button 1 to ON. Check that the machine heats up correctly: if it still does not work
properly this means that the heating element has been damaged; have the machine
repaired by an ELEKTRA Service Centre.
THE MACHINE DOES NOT HEAT UP (L-S)
If the machine was switched on by mistake without having filled the water circuit,
the heating element safety device might have been activated.
This device protects the electric heating element against damage due to momentary
overheating caused by lack of water.
Proceed as follows:
1) Proceed as indicated in chapter “E STARTING UP THE NEW MACHINE FOR THE FIRST TIME”.
2) Check that the machine heats up correctly: if it does not, switch off the machine
by putting the on/off button 1 to OFF and pull out the plug.
3) Remove the yellow plastic cap located under the bottom of the machine.
4) Insert a sharp pointed object into the hole left by the yellow cap and use it to press
the small underlying button.
5) Refit the yellow cap.
6) Connect the plug to the power socket and switch on the machine by putting the on/off
button 1 to ON. Check that the machine heats up correctly: if it still does not work
properly this means that the heating element has been damaged; have the machine
repaired by an ELEKTRA Service Centre.
1
2