Elektor 19883, Пошаговая инструкция, Страница: 5 / 34

● 5
Table of content
Main Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 • Let’s mount the four BNC sockets . . . . . . . . . . . . . . . . . . . . . . . . 9
3 • Let’s preassemble the Hammond case. . . . . . . . . . . . . . . . . . . . . 9
4 • My first start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 • Calibration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 • Final mounting in the Hammond case . . . . . . . . . . . . . . . . . . . . 18
7 • Final adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8 • Stand-alone mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9 • Use in PC mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
10 • Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Other information sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Appendix (LCR6 texts v3.txt) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
Assembled prototype.
Your kit has been carefully checked. Both boards have been tested
individually. This manual explains how to assemble and calibrate
your kit. Calibration will allow you to become familiar with the unit,
and to be able to repeat it if the need arises later.
(All photos Eurocircuits unless otherwise stated)