2 MHz LCR Meter Kit AU2019 Assembly Manual
●
24
9 • Use in PC mode
Start the device in PC mode (the message Waiting for the GUI... is dis-
played) and, a few seconds later, run the AU2019 program on the PC.
22. Window for measuring a 1000-Ω resistor
using the PC (MacOS) program.
In the <Port> menu, select the correct port, then click the [Open Port]
button. If communication is established, the firmware version will be
displayed to the right of the AU2019 program version. A few seconds
later, all DUT parameters will be displayed.
The port settings are saved and will be used the next time you start up.
The first time a floating window appears, it is attached to the bottom
of the main window. You can detach and resize it. Similarly, you can
move and resize the main window. All new settings will be saved when
the program is closed.
The buttons act as for the Stand-alone mode (long press of the [TRIM]
button is taken into account).
For the frequency value ([Freq] button) or the DC bias value ([DC] but-
ton), it is possible to choose any value within the allowed range. Press
the Return key on your keyboard to validate the new value.
The AC button changes the AC level in this sequence:
1 V
→
0.5 V
→
0.2 V
→
0.1 V
→
1 V ...
Содержание 19883
Страница 2: ...2 MHz LCR Meter Kit AU2019 Assembly Manual 2...
Страница 33: ...Appendix LCR6 texts v3 txt 33...